Temperature and Humidity Control Module Digital Display Advanced Dual Output Automatic Constant Tem

The temperature function is as follows: 1. Automatic recognition of working mode:The system automatically recognizes the working mode according to the starting temperature/stop temperature;Start temperature stop temperature, cooling mode "C"; start temperature Less than stop temperature, heating mode "H"; 2. Cooling mode:When the detected temperature equal the starting temperature, the relay is turned on, the red indicator light is on, and the cooling device starts to work;When the detected temperature less than equal stop temperature, the relay is turned off, the red indicator light is off, and the cooling device stops working. 3. Heating mode:When the detected temperature less than equal the starting temperature, the relay is turned on, the red indicator light is on, and the heating device starts to work;When the detected temperature equal stop temperature, the relay is turned off, the red indicator light is off, and the heating device stops working. 4. Temperature correction function OFE (-10.0~10.0C):The system works for a long time, and there may be deviations. Corrected by this function, the actual temperature = measured temperature + calibration value; Product Name: Temperature and Humidity Controller Temperature range: -20 C -60 C Humidity range: 00%-100% rh Control accuracy: 0.1C. 0.1% RH Detection probe: integrated sensor Output type: relay output Output capacity: up to 10A Product functions are mainly into two categories:temperature function and humidity function; Material:Plastic colour:black Package Contents: 1 * Humidity controller Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.